WiFi Configuration

Configure wireless network connectivity for your Rockettec Overseer.

WiFi Modes

The Overseer supports two WiFi operating modes:

Connecting to Your WiFi Network (From Hotspot Mode)

When the device is in hotspot mode, you need to save your network first:

1. Go to WiFi page
2. Under "Add Network", enter:
   • Network Name (SSID): Your WiFi network name
   • Password: Your WiFi password
3. Click Save Network
4. Click Switch to Client Mode
5. You will be disconnected from the hotspot
6. The device will connect to your saved network
7. Find the device's new IP address on your router/network
8. Reconnect to the device using the new IP

Already in Client Mode?

If you're already connected via WiFi (client mode):

1. Go to WiFi page
2. Click Scan to find available networks
3. Select a network from the list
4. Enter the password
5. Click Connect

Switching Back to Hotspot Mode

If you need direct access to the device:

1. Go to WiFi page
2. Click Switch to Hotspot
3. The device will start broadcasting its own WiFi
4. Connect to the device's WiFi network (e.g., Overseer-XXXX)

Managing Saved Networks

• View saved networks in the "Saved Networks" section
• Click the delete icon to remove a saved network
• The device will use saved networks when in client mode

Finding the Device IP Address

After connecting to WiFi, find the device's new IP using one of these methods:

• Check your router's DHCP client list
• Use a network scanner app
• Check via WireGuard VPN if already configured

WiFi Specifications

Note: 5GHz networks are not supported. Ensure your target network operates on 2.4GHz.

Troubleshooting

See Troubleshooting for WiFi connection issues.